میکروکنترلر PIC16F616-I/P پکیج DIP

سازنده: Microchip

High-Performance RISC CPU:
Only 35 Instructions to Learn:
All single-cycle instructions except branches
Operating Speed:
DC – 20 MHz oscillator/clock input
DC – 200 ns instruction cycle
Interrupt Capability
8-Level Deep Hardware Stack
Direct, Indirect and Relative Addressing modes
Special Microcontroller Features:
Precision Internal Oscillator:
Factory calibrated to ±1%, typical
User selectable frequency: 4 MHz or 8 MHz
Power-Saving Sleep mode
Voltage Range:
PIC16F610/616: 2.0V to 5.5V
PIC16HV610/616: 2.0V to user defined
maximum (see note)
Industrial and Extended Temperature Range
Power-on Reset (POR)
Power-up Timer (PWRT) and Oscillator Start-up
Timer (OST)
Brown-out Reset (BOR)
Watchdog Timer (WDT) with Independent
Oscillator for Reliable Operation
Multiplexed Master Clear with Pull-up/Input Pin
Programmable Code Protection
High Endurance Flash:
100,000 write Flash endurance
Flash retention: > 40 years
Low-Power Features:
Standby Current:
50 nA @ 2.0V, typical
Operating Current:
20μA @ 32 kHz, 2.0V, typical
220μA @ 4 MHz, 2.0V, typical
Watchdog Timer Current:
1μA @ 2.0V, typical
Note: Voltage across internal shunt regulator
cannot exceed 5V.
Peripheral Features:
Shunt Voltage Regulator (PIC16HV610/616 only):
5 volt regulation
4 mA to 50 mA shunt range
11 I/O Pins and 1 Input Only
High current source/sink for direct LED drive
Interrupt-on-Change pins
Individually programmable weak pull-ups
Analog Comparator module with:
Two analog comparators
Programmable on-chip voltage reference
(CVREF) module (% of VDD)
Fixed Voltage Reference
Comparator inputs and outputs externally
accessible
SR Latch
Built-In Hysteresis (user selectable)
Timer0: 8-Bit Timer/Counter with 8-Bit
Programmable Prescaler
Enhanced Timer1:
16-bit timer/counter with prescaler
External Timer1 Gate (count enable)
Option to use OSC1 and OSC2 in LP mode
as Timer1 oscillator if INTOSC mode
selected
Timer1 oscillator
In-Circuit Serial ProgrammingTM (ICSPTM) via Two
Pins
PIC16F616/16HV616 only:
A/D Converter:
10-bit resolution
8 external input channels
2 internal reference channels
Timer2: 8-Bit Timer/Counter with 8-Bit Period
Register, Prescaler and Postscaler
Enhanced Capture, Compare, PWM module:
16-bit Capture, max. resolution 12.5 ns
16-bit Compare, max. resolution 200 ns
10-bit PWM with 1, 2 or 4 output channels,
programmable “dead time”, max. frequency
20 kHz